Couldn't load pickup availability
BUY ONLINE AND RECEIVE A FREE SET OF BLADES & DRIVE BELTS
Cloveragri KDK Series Heavy Duty Mulcher Plus, 540 RPM, Hydraulic side shift, Hydraulic rear door, Pto shaft CE included.
The Cloveragri KDK Heavy Duty Mulcher is designed for demanding agricultural and property maintenance applications where strength, cutting capacity and efficient material flow are important.
The KDK combines a 100 HP rated gearbox, heavy-duty 6 mm deck, hydraulically operated rear doors and 1.5 kg hammer blades to deliver a robust mulching solution for heavy grass, scrub and woody regrowth.
With cutting widths from 2.2m to 3m and an approximate maximum cutting capacity of 80–100 mm, the KDK is built for serious vegetation management.
✓ 100 HP HEAVY DUTY GEARBOX
Heavy-duty 100 HP rated gearbox designed for demanding PTO applications and sustained mulching workloads.
✓ 6 MM HEAVY DUTY DECK
Substantial 6 mm deck construction provides additional strength and durability.
✓ HYDRAULIC REAR DOORS
Hydraulically controlled rear doors allow the operator to adjust material flow to suit different vegetation and operating conditions.
Opening the rear doors provides greater material flow and discharge in heavy vegetation. Closing the doors retains material in the mulching chamber longer for additional processing and a finer finish.
✓ 1.5 KG HEAVY DUTY HAMMER BLADES
Large 1.5 kg hammer blades provide substantial cutting impact for heavy vegetation, scrub and woody regrowth.
✓ APPROX. 80–100 MM CUTTING CAPACITY
Designed for suitable woody vegetation and regrowth up to approximately 8–10 cm diameter, depending on vegetation type and operating conditions.
✓ Ø194 × 12 MM HEAVY DUTY ROTOR
Large rotor provides substantial rotating mass for demanding mulching applications.
✓ 5 × B-SECTION DRIVE BELTS
Heavy-duty 5 × B-section drive belts provide reliable power transfer from the gearbox to the rotor.
✓ 380 MM HYDRAULIC SIDE SHIFT
Hydraulic side shift allows the mulcher to be positioned closer to fence lines, trees and other obstacles.
✓ Ø168 × 8 MM HEAVY DUTY REAR ROLLER
Large heavy-duty rear roller provides cutting-height control and helps the machine follow ground contours.
✓ 540 RPM PTO
Designed specifically for operation at 540 PTO RPM.
| Model | Cutting Width | Weight | Tractor HP | 1.5 kg Hammers |
|---|---|---|---|---|
| KDK220 | 2150 mm | 895 kg | 75–130 HP | 18 |
| KDK240 | 2350 mm | 935 kg | 75–130 HP | 20 |
| KDK260 | 2550 mm | 975 kg | 85–130 HP | 22 |
| KDK280 | 2750 mm | 1,015 kg | 95–130 HP | 24 |
| KDK300 | 2950 mm | 1,055 kg | 100–130 HP | 26 |
Gearbox: 100 HP rated
Deck: 6 mm heavy duty
Rear Doors: Hydraulic opening/closing
Maximum Cutting Diameter: Approx. 80–100 mm
Hammer Weight: 1.5 kg each
Drive Belts: 5 × B-section
PTO Speed: 540 RPM
Hydraulic Side Shift: 380 mm
Rotor: Ø194 × 12 mm
Rear Roller: Ø168 × 8 mm
PTO Shaft: 08B-800
Farms and acreage
Heavy paddock maintenance
Dense grass and weeds
Scrub and regrowth
Woody vegetation
Orchard and plantation maintenance
Roadside vegetation management
Fence-line maintenance
General property maintenance
The KDK is designed to operate at 540 PTO RPM. Do not exceed the specified PTO speed.
Correct PTO shaft length, tractor linkage setup, machine levelling, operating height and ground speed are essential for reliable operation.
The stated 80–100 mm cutting capacity depends on vegetation type, density, tractor horsepower, ground speed and operating conditions.
The KDK is designed for vegetation and suitable woody material. It is not designed for crushing or mulching rocks.
| Model | Dimension | Cutting Length mm | Weight | Side shift distance mm |
HP | Hammer Qty |
Belt | RPM | Rotor | Roller | PTO | Thickness of plate |
| KDK220 | 2540x1150x1000 | 2200 | 895KG | 380 | 75-130 | 18 | 5 | 540 | φ194x12 | φ168x8 | 08B-800 | 6mm |
| KDK240 | 2740x1150x1000 | 2400 | 935KG | 380 | 75-130 | 20 | ||||||
| KDK260 | 2940x1150x1000 | 2600 | 975KG | 380 | 85-130 | 22 | ||||||
| KDK280 | 3140x1150x1000 | 2800 | 1015KG | 380 | 95-130 | 24 | ||||||
| KDK300 | 3340x1150x1000 | 3000 | 1055KG | 380 | 100-130 | 26 |
I would like to thank Scott for his assistance and professionalism. I purchased a self loading mini dumper about 3 weeks ago. The service was great from the first call right the way through. The machine arrived in a timely manner and all was as promised. I love the machine and reckon I have added in years on to my life. As a landscaper the work is hard and gruelling whilst the end result is great. This machine ANTYB800 is a godsend, I am able to use it to transport materials like concrete blocks effortlessly, loading large pebbles into the bin is effortless too, I moved on my own 13 tonnes of roadbase and pebbles in about 7 hours whereas the previous day without it I was only able to move 2 using a mini dumper I had to manually load. The beauty about this machine is you can use it to transport, move materials, level off, it comes with an auger so holes for fence posts and retaining walls are a breeze. Thanks Scott
Got a BY800 mini dumper. Quality machine. Great service, fast postage, hassle free. Scott is excellent to deal with.Thank you.
Purchased a mini excavator and am very happy with the product for small acreage use. The after sales support has also been amazing!!
Scott is a great salesperson, we could only get there on a Saturday morning and it was no worries to meet us there to check out the gear. Husband ended up buying a little digger 2 weeks later, loves it. Great price too. Thanks Scott.
Scott was extremely helpful and professional. kept me informed through the whole process of my purchase and delivered on what he promised. will be recommending these guys
Recently purchased a Rhinoceros n16 Excavator from Scott and we found him to be extremely helpful patient and above all accurate with all his advice it was a smooth transaction and the excavator is proving to be excellent and well up to the tasks asked of it, have approx 25 hrs on machine from digging plenty of trenches & auguring 16 deep holes highly recommend Scott, Bestpriceme, & the machine to all thanks Terry Coles
